Tungsten Bar

Tungsten bar is mainly used to found ingredient of material, cutter and heads, tungsten wire for lights instruments, electric contact points and conductor of heat, crankshaft and cylinder Tungsten barrel of advanced automobile, ingredient of kinds of heat-resistant steel. Also used for making special steels, to make guns, artillery rockets, satellite airplane and ship. Tungsten bars have a luster rather like that of silver in uniform color. Though the whole tungsten bars may slightly curve, the maximum height of the bend should not be more than 7mm.
The most popular application of tungsten bar is in steel making industry. Tungsten bars are used to improve the property of steel.
Tungsten bar with impurities is used to procedure bulb filaments or electron tube filaments, which are guaranteed to have remarkable resistance to high temperature.
Grade of Tungsten bar:
In reference to different chemical components and applying requirement, the grades of products are divided into four categories: W1, W2 ,W3, W4.
Dimensions of tungsten bar:
(10-14)×(10-14)×(400-600) mm
The length of the finished tungsten bar for W1, W2, and W3 should not be less than 300mm, and that for W4 should not be less than 30mm.
Appearance of tungsten bar:
The appearance of tungsten bar turns to be metallically gray or dark gray. Hygroscopy is not allowed on the appearance of W1 ,W2, and W3 tungsten bars.
Surface State of tungsten bar:
Any oxidation, contamination, and severe excessive fusion, bubbling, delamination, or crack is not allowed for product W1. Camber should be no more than 10mm. Any excessive fusion, bubble, delamination, crack, surface bulky crystallization or severe oxidation &contamination are not allowed for products W2 and W3. The length of the spalls should not be more than 8mm, width no more than 3mm, depth no more than 1mm; The diameter of mechanical pitting should not be more than 1mm, depth no more than 0.5mm; Camber should be no more than 4mm.
Any oxidation or contamination is not allowed for product w4.
The cartridge of the vertical sintering part should be cut off, and the section is not allowed to be loose or intermingled.
Physical property of tungsten bar:
The density for W2, W3 tungsten bars is more than 17.5g/cm3.
Measured data for the section grain size of W2, W3 can be provided. If the buyer has any other special demand, it can be discussed on the base of mutual negotiation.
Quality Guarantee:
The buyer should take an acceptance inspection on the goods in accordance with this standard in three months from the day of getting the goods. If the inspecting results do not meet the grade criteria set on the Quality Guarantee, the products is still regarded as unqualified after the unsuccessful mutual test.
Package:
The products should be package in wooden boxes with inner shaped foam,6-12 pieces and 40kgs max. net each.
Transportation:
During the transportation, the goods should be moisture proof and clear of violent collision.
Storage:
Storage place: dry, ventilated, acid & alkali proof, anti-oxidant. The storage time should be limited in six months.

Chemical Composition

Grades		WB-1	WB-2	WB-3	WB-4	Typical-1	Typical-2
Impurities %,max	Pb	--	--	--	0.001	--	0.001
	Bi	--	--	--	0.001	--	0.001
	Sn	--	--	--	0.001	--	0.001
	As	--	--	--	0.002	--	0.001
	Fe	0.005	0.005	0.010	0.05	0.005	0.020
	Ni	0.003	0.003	0.005	0.30	0.002	0.005
	Al	0.002	0.002	0.005	0.005	0.001	0.003
	Si	0.003	0.003	0.010	0.010	0.0015	0.002
	Ca	0.003	0.003	0.005	0.005	0.002	0.005
	Mg	0.002	0.002	0.005	0.010	0.001	0.001
	Mo	0.010	0.010	0.20	0.20	0.003	0.050
	P	0.001	0.001	0.002	0.005	0.001	0.001
	C	0.005	0.008	0.010	0.010	0.003	0.003
	O	0.003	0.003	0.005	0.008	0.003	0.008
	N	0.003	0.003	--	--	0.003	--
	Sb	--	--	--	0.001	--	0.0005
Uses		For making tungsten alloy	For Processing material	For processing material	For alloy additive	For processing material	For alloy additive

Tungsten Bars

Densalloy, our heavy alloy product, is offered as machinable blanks or finished parts precision machined to the customer's specifications. Densabore is our tungsten alloy material for boring bars and grinding quills.

Manufacturers of tungsten carbide wires, bars, and tube drawing dies.

Specialist tungsten and tungsten carbide manufacturer and supplier in the Chinese Mainland.

Gold Plated Tungsten Bars

Offers tungsten, palladium, and platinum bands and both gold and white gold rings. Warranty available.

Online catalog of gold brush and tank plating supplies. Patented machines like the AC750 and patented chemicals like OneStep gold allow you to plate directly over chrome with no stripping.

Provide gold, silver and chrome plating items including gold iPod, iPad, iPhone, and gold plated mobile phones.

Polished Plated Gold Tungsten Bar

Polishing and plating of motorcycle parts in chrome, silver, nickel, gold, and brass.

Offers broad range of plating and finishing services. Includes chrome, brass, copper, electroless nickel, gold, silver, and zinc, as well as powder coating, buffing, and polishing. Serves both automobile and industrial markets.

Offers metal repair, restoration, fabrication, refinishing, plating, polishing, lacquering of silver, silver plate, bronze, gold, copper, brass, and special finishes.

Gold Plated Tungsten Coin Bar

Dealer of gold and silver coins and bullion as well as platinum and palladium coins and bars - live online coin and bullion bar buying and selling prices.

Rare coins and precious metals. Buys, sells and appraises rare American gold and silver coinage struck in the 18th and 19th centuries as well as gold, silver and platinum bullion bars and coins.

Specialists in the bullion retail market, selling gold and silver coins and bars.